NEC-300C

NEC-300C

Battery Crimping Tool 16-300mm²

1.   Micro computer control system-automatically detects the pressure when in crimping with double safety protect.

2.   The tool is equipped with a double piston pump which characterized with a fast approach towards the connecting material and transfer to high pressure automatically by slow crimping.

3.   If a deviation from the set operation pressure or low battery charges is ldentified, an acoustic signal sounds and a red display flashes.

4.   One key control- press the trigger to start working. half loosing the trigger means stop forcing pressure, loosing fully means piston Return to the original position

5.   A Temperature sensor makes the tool stop working automatically when the temperature is over 60℃ under long time working, the fault signal sounds,it means the tool can't continue to work until the temperature reduced to the normal.